Wednesday, April 15, 2020

MARCH/APRIL 2020 KIT-OF-THE-MONTH ASSEMBLY INSTRUCTIONS!

Assembly Instructions

Thanks for ordering the Craft Fantastic MARCH/APRIL KIT! 
This kit is available for a limited time. 
Click HERE to order yours today!  

We recommend laying out the contents of the kit and using 
the Ingredients listed below to sort the pieces into their separate projects. 

Here are links to help you complete the projects followed by a few 
assembly instructions for each piece:









Ingredients:

24" Rolo Chain
Small Round Modular Trays (2)
Medium Round Modular Tray
Small Glass Rounds (2)
Medium Glass Round
Tiny Bee Charm
Small Jump Rings
  1. Select images and add them to the glass cabochons using Fantastic Glaze & Glue.   
  2. Using scissors, cut the center of a 24" Rolo Chain.
  3. Using pliers, gently bend back the top loops on each of the Small Round Modular Trays. Then, locate the bottom loop directly opposite of the top loop, but bend back the loop directly inside of that loop as pictured. This slight offset will ensure the necklace lays properly when worn. Next, bend back the upper right and left loops on the Medium Round Modular Tray as pictured. Also, bend back the loop directly on the bottom of the tray.
  4. Using Small Jump Rings, attach one end of the Rolo Chain to the top of one of the Small Round Modular Trays, then attach the other end to the remaining Small Round Tray. Be sure the bottom loops are angled toward each other when you lay the necklace out.
  5. Using Small Jump Rings, attach the bottom loops of the Small Round Modular Trays to the upper left and right loops on the Medium Round Modular Tray. 
  6. Using a Small Jump Ring, attach the Tiny Bee Charm to the bottom of the Medium Round Modular tray. 
  7. Add Super Sticky Dots to each tray. Remove the red backing to expose the adhesive. 
  8. Firmly press the cabochons into the appropriate trays. 



Ingredients:

30" Rolo Chain
Large Oval Modular Tray 
Tiny Round Modular Tray
Large Glass Oval
Tiny Glass Bling
Small Jump Rings
  1. Select an image and add it to the glass cabochon using Fantastic Glaze & Glue.   
  2. Using scissors, cut the center of the 30" Rolo Chain.
  3. Using pliers, gently bend back the loops located on the upper right and left areas as shown on the Large Oval Modular Tray. Also, bend back the loop directly on the bottom of the tray.
  4. Using Small Jump Rings, attach one end of the Rolo Chain to the upper left loop on the Large Oval Modular Tray and the other end of the Rolo Chain to the upper right loop.
  5. Using pliers, bend back one loop on the Tiny Round Modular Tray. Then attach it to the bottom of the Large Oval Tray using a Small Jump Ring.
  6. Add two Super Sticky Dots to the Large Oval Modular Tray. Add 1/4 of a Super Sticky Dot to the Tiny Round Modular Tray. Remove the red backing to expose the adhesive. 
  7. Firmly press the cabochon and the Crystal Gem into the appropriate trays. 



Ingredients:

24" Rolo Chain
Small Oval Modular Tray
Small Glass Oval
Fancy Toggle
Tiny Bee Charm
Pinch Bail
Small Jump Rings
  1. Select an image and add it to the glass cabochon using Fantastic Glaze & Glue.   
  2. Using pliers, remove the lobster clasp and the jump ring from the end of a 24" Rolo Chain. Attach the Fancy Toggle loop to one end of the chain and the Fancy Toggle bar to the other end using Small Jump Rings. 
  3. Using pliers, gently bend back the loop at the top of the Small Oval Modular Tray and the loop directly opposite. 
  4. Using a Pinch Bail, attach the Small Oval Modular Tray to the Fancy Toggle loop.
  5. Using a Small Jump Ring, attach the Tiny Bee Charm to the bottom of the Small Oval Modular Tray.
  6. Add a Super Sticky Dot to the tray. Remove the red backing to expose the adhesive. 
  7. Firmly press the cabochon into the tray. 



Ingredients:

Small Round Modular Trays (7) 
Tiny Round Modular Tray
Small Glass Rounds (7)
Tiny Round Crystal Gem 
Tiny Bee Charm
Lobster Clasp
Large Jump Ring
Small Jump Rings
  1. Select images and add them to the glass cabochons using Fantastic Glaze & Glue. 
  2. Using pliers gently bend back a loop on each Small Round Modular Tray. Then bend back the loop that is directly opposite from the first loop. 
  3. Using Small Jump Rings, connect the trays together.
  4. Using a Small Jump Ring, attach the Lobster Clasp to one end of the bracelet.
  5. Using pliers, bend back one loop on the Tiny Round Modular Tray. 
  6. Using Small Jump Rings, attach the Tiny Round Modular Tray and the Tiny Bee Charm to the Small Jump Ring on the bracelet positioned right before the Large Jump Ring. 
  7. Add a Super Sticky Dot to each tray. Add 1/4 of a Super Sticky Dot to the Tiny Round Modular Tray. Remove the red backing from each tray to expose the adhesive. 
  8. Firmly press the appropriate cabochon into each each tray. Firmly press the Tiny Round Crystal Gem into the Tiny Round Modular Tray. 




Ingredients:

Tiny Round Modular Trays (6)
Tiny Crystal Gems (6) 
French Ear Wires (2)
Small Jump Rings
  1. Using pliers, gently bend back a loop on each of the Tiny Round Modular Trays. On four of the trays, bend back the loop that is on the opposite end from the first loop. 
  2. Using Small Jump Rings, connect three Tiny Round Modular Trays together, be sure to end each trio with a tray that has not had the bottom loop bent back.  
  3. Attach a French Ear Wire to the top of each trio.
  4. Add 1/4 of a Super Sticky Dot to each tray. Remove the red backing to expose the adhesive. 
  5. Firmly press a Crystal Gem into each tray. 




Ingredients:

Small Round Modular Trays (2)
Small Glass Rounds (2)
Tiny Bee Charms (2)
French Ear Wires (2)
Small Jump Rings
  1. Select images and add them to the glass cabochons using Fantastic Glaze & Glue. 
  2. Using pliers gently bend back a loop on each Small Round Modular Tray. Then bend back the loop that is on the opposite end from the first loop. 
  3. Attach a French Ear Wire to the top of each Small Round Modular Tray.
  4. Using Small Jump Rings, attach a Tiny Bee Charm to the bottom of each Small Round Modular Tray.
  5. Add a Super Sticky Dot to each tray. Remove the red backing to expose the adhesive. 
  6. Firmly press the appropriate cabochon into each tray. 




Ingredients:

Mini Round Modular Trays (2)
Tiny Oval Modular Trays (2)
Mini Crystal Gems (2)
Tiny Glass Ovals (2)
French Ear Wires (2)
Small Jump Rings
  1. Select images and add them to the glass cabochons using Fantastic Glaze & Glue. 
  2. Using pliers, gently bend back a loop on each Mini Round Modular Tray. Then bend back the loop that is on the opposite end from the first loop. Bend back a loop on the top of each Tiny Oval Modular Tray.
  3. Attach a French Ear Wire to the top of each Mini Round Modular Tray.
  4. Using Small Jump Rings, attach the Tiny Oval Modular Trays to the Mini Round Modular Trays.
  5. Add a Super Sticky Dot to each tray. Cut the dots in half to use in the Tiny Oval Modular Trays. Remove the red backing to expose the adhesive. 
  6. Firmly press the appropriate cabochon or Crystal Gem into each tray. 




Ingredients:

Tiny Oval Modular Trays (2)
Tiny Glass Ovals (2) 
Tiny Bee Charms (2)
French Ear Wires (2)
Small Jump Rings
  1. Select images and add them to the glass cabochons using Fantastic Glaze & Glue. 
  2. Using pliers, gently bend back a loop on each Tiny Oval Modular Tray. Then bend back the loop that is on the opposite end from the first loop. 
  3. Attach a French Ear Wire to the top of each Mini Round Modular Tray.
  4. Using a Small Jump Ring, attach a Tiny Bee Charm to the bottom of each Tiny Oval Modular Tray.
  5. Add half of a Super Sticky Dot to each tray. Remove the red backing to expose the adhesive. 
  6. Firmly press the appropriate cabochon into each tray. 

5 comments:

  1. Can't wait to receive my kit and try these!

    ReplyDelete
  2. Do you have a spam problem on this site; I also am a blogger, and I was wondering your situation; many of us have created some nice procedures and we are looking to swap techniques with other folks, be sure to shoot me an email if interested.
    Deep Blue Sea Round Earrings

    ReplyDelete
  3. Hey! It’s me, Alan Owen! From The Social Network to Tenet to The Muppets, I have a huge watchlist. Apart from watching movies, I am also a coder and a learner of technology. Readers of blogs get the latest updates related to the technical world too.
    mcafee.com/activate
    office.com/setup
    mcafee.com/activate
    norton.com/setup
    webroot.com/safe

    ReplyDelete
  4. Optoma is a world leading, and award winning projector brand. With our business philosophy of dedication, professionalism and efficiency which bring synergy to corporate vision, comprehensive product categories and

    flexible marketing strategy read more click here: 4K Projector

    Home Cinema Projector

    ReplyDelete
  5. Amazon Prime video allows clients to download videos in three different formats, such as SD, HD, or 4k Ultra HD. Clients can then download the video according to their preference.
    amazon.com/redeem
    amazon.com/mytv
    amazon.com/redeem
    amazon.com/code
    amazon.com/mytv

    ReplyDelete

Thank you for stopping by! Your comments mean so much to us.