Thursday, November 19, 2015

Tiered Butterfly Necklace!

Not so much a tutorial today as a project idea and recipe. Are you needing something a little different for someone special this holiday season? I have just the gift idea for you! A tiered butterfly necklace featuring some of the latest and greatest Craft Fantastic items added to our product line.

This 3-tiered necklace showcases a simple medium oval tray on the first strand, offset by a string of sweet petite flower connectors on the second strand, with a series of beautiful delicate butterfly charms rounding out the trio on the third strand.

This project took me about an hour to complete and there was lots of adjusting lengths and so forth, but I am really please with the results and would be happy (and proud) to give this as a gift.

Let's get started...

What You'll Need 

Craft Fantastic 30" Rolo Chains (3)

Craft Fantastic Medium Oval Tray

Craft Fantastic Medium Oval Glass

Craft Fantastic Flower Connectors (7)

Craft Fantastic Butterfly Charms (5)

Craft Fantastic Large Jump Rings (2)

Craft Fantastic Small Jump Rings - You'll need LOTS of these.

Craft Fantastic Lobster Clasp

Fantastic Glaze & Glue

Fantastic Jeweler's Dot

Pliers

Scissors

Cotton Swabs



Here's a look at my 3-tiered butterfly necklace. It's graceful and elegant; a lovely accessory the recipient would be proud to wear.



Here's a closer look. Lots of details on this one! I am head over heels in love with those Flower Connectors!



This project requires more supplies and time than some of my past blog projects, but if you need something special, this one fits the bill.



I started by selecting an image to correspond with my butterfly charms. 



Then I removed all of the lobster clasps and jump rings from the three rolo necklaces. I cut the first rolo down to 17" to allow for the addition of the 2 large and 2 small jump rings. I used the large jump rings to have adequate room to attach smaller jump rings for each of the 3 strands. I made sure to string my pendant tray on the strand before adding the larger jump rings. Here's my recipe for the first strand...

Lobster Clasp
Small Jump Ring
Large Jump Ring
Small Jump Ring
17" piece of Rolo Chain (with tray strung)
Small Jump Ring
Large Jump Ring 



Next, I cut my second rolo into pieces carefully measuring them out with a ruler. To be more accurate, I recommend counting the links. I had to fiddle with this strand to get the length I wanted and to make it clear the Medium Oval Tray from the first strand. I might do this piece again with a smaller tray. Here's my recipe for the second strand... 

Small Jump Ring 
4 3/4" piece of Rolo Chain
Small Jump Ring
Flower Connector
Small Jump Ring
1 1/8" piece of Rolo Chain
Small Jump Ring
Flower Connector
Small Jump Ring
1 1/8" piece of Rolo Chain
Small Jump Ring
Flower Connector
Small Jump Ring
1 1/8" piece of Rolo Chain
Small Jump Ring
Flower Connector 
Small Jump Ring
1 1/8"piece of Rolo Chain
Small Jump Ring
Flower Connector 
Small Jump Ring
1 1/8"piece of Rolo Chain
Small Jump Ring
Flower Connector
Small Jump Ring
1 1/8"piece of Rolo Chain
Small Jump Ring
Flower Connector 
Small Jump Ring
4 3/4" piece of Rolo Chain
Small Jump Ring 



Remember that the small jump rings from each strand will need to be attached to the two main jump rings for the closure and clasp.



To make the third and final strand, I cut a 24" length of rolo chain, attached small jump rings to each end and then affixed each of my butterfly charms along the bottom also using small jump rings.  Here's the recipe for the third strand...

Small Jump Ring
24" piece of rolo chain
Small Jump Ring
Add Butterfly Charms with Small Jump Rings



The finished piece! Imagine how many tiered necklaces you can create using Craft Fantastic elements. The possibilities are endless! I'm already thinking about my next piece. How about you?

Give this project a try and be sure to share pics on our Craft Fantastic Facebook Page! Also, be sure to follow this blog by email so you never miss a post! I share something new every week, so it's worth checking out. See you next week! 

Wednesday, November 11, 2015

Back to the Basics: Applying an Image to a Glass Cabochon



It's back to the basics this week on the blog. Today I'll show you step by step how to apply our Art Images to the back of a glass cabochon and then turn that simple cab into a pendant. I know many of you have been using Craft Fantastic products for a long time, so this post will just be a refresher for you. We have, however, lots of new folks who have joined the Craft Fantastic family as of late, so I thought it would be great to have a basic tutorial for this process as a reference on the blog.

Our entire line of products centers around our crystal clear glass cabs. They exquisitely showcase family photos, art, decorative papers, ephemera, collage elements, and of course, our Craft Fantastic Art Images. Once a photo or an image has been applied to the glass, they become the heart of the jewelry pieces created with them turning them into wearable pieces of art or portable memories.   

Let's get started...

What You'll Need

Assorted Craft Fantastic Glass Cabochons - We carry them in an array of shapes and sizes, from big and bold to sweet and petite. 


Assorted Craft Fantastic Art Images - Interested in using a scanned photo instead? Visit this link where I answer all of your questions about printing your photos at home.




Cotton Swabs

Scissors 


Today I'm making six pendants, which should take me about 30 minutes total. At the end of this process I will have six completed projects that will make wonderful stocking stuffers, hostess gifts, or impromptu presents for that person I may have inadvertently forgot to add to my Christmas list. Don't laugh, it happens to me every year. 



I'll start with my Large Glass Oval. 



Working on the flat side of the glass, I apply several dollops of the Fantastic Glaze & Glue. This is one of our largest pieces of glass so I make sure to add a couple of dollops to the middle and then all around the edges. Too much glue can be wiped away, but too little glue is really hard to fix once the glass is applied to the image.  



I lay the glass oval glue side down on top of my image and press it firmly to force any air bubbles out to the sides. Glue should ooze slightly outside of the edges. I try not to move the glass too much after I lay it on my image. I hold it in place until I feel it sort of "grab" the paper. This only takes a minute. 



Once I'm confident that the glass is firmly in place, I use a cotton swab to wipe away the excess glue from around the edges. 



I've glued all of my glass pieces in place. I wasn't paying attention and the small round glass cab on top of the "v" drifted off to the side, so I had to re-make that one. Oops. Don't tell ;)



Next, I trim away all of the excess paper from my glass pieces by cutting right up next to the edge with my scissors. These are just inexpensive scissors that that I'm not emotionally attached to as they are going to get a bit gunky after awhile and will eventually end up in the trash. So keep those expensive fabric scissors tucked away and hide your fancy paper scissors, because you will not need them for this process. 



I place Fantastic Glue Dots into the trays using one dot for medium and smaller trays and two dots for larger trays. I place the dot into the tray, remove the red backing to expose the adhesive and press the glass piece firmly into it to form a strong bond between the tray and the glass. If I apply the glue dot to the back of the glass and then press it into the tray, I won't create that bond and eventually my glass piece will fall out. No mi gusto.



Here are my six trays finished and ready for chain to finish them off. The pendant bail means that I can just slip a chain through the loop and they're ready to wear. No need to add a separate jump ring or pinch bail. How easy is that?




Here are my completed pendants ready to give or to wear. 






Thursday, November 5, 2015

New Product Sneak Peek AND a Giveaway!

No tutorial this week, but never fear, I'm not going to neglect the kind folks that visit our blog each week. Instead of a tutorial I'm sharing an exclusive peak at some new items we're adding to the Craft Fantastic Shop!

Anne has carefully curated three new vintage style trays that you are going to absolutely fall in love with! These trays are beautiful on their own or stunning when coordinated with other Craft Fantastic elements. Pair them with your cherished family photos or fill them with lovely collaged images from our Art Image Sheet collection.

These trays will be available in the Craft Fantastic shop in the next two weeks, but leave me a comment on this blog post for an opportunity to win a sweet little prize pack featuring these new items and lots of other goodies! Tell me how you would use these new trays and on November 16th I'll randomly select a winner! Sign up to follow this blog via email and I'll throw your name in the hat again, doubling your chances of winning!

Come on! Let's see those comments!


 Pocket Watch Tray - fits small round glass, available in Antique Silver and Antique Brass 


Clock Tray - fits medium round glass, available in Antique Silver and Antique Brass


Heart Key Tray - fits small round glass, available in Antique Silver and Antique Brass


 

Tuesday, November 3, 2015

Customer Spotlight, Alaina Kathryn!

Crafty Friend, Alaina Kathryn shared this picture with us on Facebook and now I am sharing it with you! She has turned her inner elf loose to create these special pieces for the holidays and they have filled us with cheer!  

Her gorgeous projects feature brightly colored holiday papers and festive images adorned with a bit of clear glitter polish for sparkle. Everything you want in your holiday jewelry!



Share your Craft Fantastic project photos with me by emailing me at DearCrafty@CraftFantastic.com and I might share your crafty pic on our blog or the Craft Fantastic Facebook Page.